|
WATER
|
|
Water Distribution Design & Modeling
|
Featuring WaterCAD, WaterGEMS, WaterSAFE,
Skelebrator, Darwin Calibrator, Darwin Designer, and
PumpMaster
Learn to use this software to analyze and design complex water distribution systems.
|
|
Transient Analysis
|
|
Featuring HAMMER
This two-day course is designed for engineers and
managers in the water, hydro-power, and oil industries
who are tasked with preventing damage to their
pipeline and pumping infrastructure caused by
hydraulic transients and water hammer.
|
|
Strategic Modeling - Water Distribution
|
Introductory Seminar Featuring WaterCAD, WaterGEMS, WaterSAFE, Skelebrator, Darwin Calibrator, Darwin Designer, PumpMaster, and HAMMER
This modeling seminar applies to engineers modeling water distribution systems in the Windows, CAD, and/or GIS environments.
You also be introduced to all the major features used for master planning and GIS mapping in WaterCAD and WaterGEMS.
|
|
SEWER
|
|
Sanitary Sewer Design & Modeling
|
Featuring SewerCAD
This course will benefit consultants, municipal engineers, project managers, and design engineers that are assessing system capacity, designing new systems, conducting rehabilitation projects, or involved in master planning.
|
|
CMOM (Capacity Management Operation Maintenance)
|
Permitting Course
Numerous communities across the U.S. have already received administrative penalties for system overflows. Prevent capacity enforcement actions from affecting your community by understanding the CMOM requirements and how they apply to your sewer system.
|
|
Strategic Modeling - Sanitary Sewer
|
Introductory Seminar Featuring SewerCAD, PumpMaster and GISConnect
Presentations provide an overview of modeling tools that apply to the various components, analysis, and design steps for a sewer project.
|
|
STORM
|
|
Stormwater System Design & Modeling
|
Featuring PondPack and CivilStorm
PondPack training focuses on the fundamentals of hydrology and detention pond modeling and design techniques. CivilStorm training teaches you how to analyze fully integrated systems of ponds, storm sewers, channels, and culverts using one integrated software model.
|
|
NPDES Phase II
|
Permitting Course
NPDES Phase II Stormwater
course takes you through the NPDES permit
process from start to finish. Through successful
completion of the course, attendees will become
familiar with the history and requirements of the
NPDES program, and be able to determine which
projects, activities, or systems require coverage
under an NPDES permit.
|
|
Storm Sewer Design & Modeling
|
If you are involved with storm sewer design, highway drainage, and/or modeling with StormCAD, this course is for you. You will learn how to apply StormCAD’s advanced features to analyze and automatically design inlet networks and storm sewer systems. Additionally, you will use FlowMaster and CulvertMaster for open channel flow and culvert design.
|
|
HEC-RAS Modeling & Mapping
|
Featuring HEC-RAS, HEC-GeoRAS, and HEC-Pack
This training introduces the student to floodplain model development and the use of HEC-RAS for assessing the
impacts of bridges, culverts and other floodplain features.
|
|
Navigating the FEMA Approval Process
|
This course, which is offered in conjunction with the Floodplain Mapping, Design & Modeling seminar, focuses on the Federal Emergency Management Agency's (FEMA) floodplain regulations and review procedures.
|
|
Modeling Watershed Hydrology Using HEC-HMS
|
Featuring HEC-HMS and HEC-Pack
In this course, you will use the HEC-HMS software to model a variety of floodplain watershed solutions.
|
|
Strategic Modeling - Stormwater
|
Introductory Seminar Featuring PondPack, CivilStorm Dynamic, StormCAD, FlowMaster, and CulvertMaster
This modeling seminar applies to engineers
modeling stormwater systems in the Windows,
CAD, and/or GIS environments. Presentations
provide an overview of modeling tools that apply
to the various components and design steps for a
stormwater project.
|
